Rogaška Slatina, Rogaška Slatina, Savinjska 3250, Slovenia

We are looking for owners of modern apartments in Rogaška Slatina. Modern design and contemporary architecture.

APARTMENT 2 consists of a storage room measuring 3.1 m2, staircase – 3.9 m2, 2 rooms of different sizes with a total area of 26 m2, a kitchen measuring 4.6 m2, a bathroom 5.5 m2, a toilet – 1.9 m2, a hallway measuring 5.5 m2, and OPEN TERRACES AND BALCONY with a total area of 37.9 m2. The total area of the building's usable spaces is 88.4 m2. The unit includes 1 parking space.

The new construction consists of 4 buildings, each with two floors that are staggered at two levels. Above the ground floor level, there is a first floor, and above the second, a rooftop terrace will be arranged. The ground floor contains one residential unit, while the first floor contains another, except for the highest part of the building, where all levels are designated for one apartment.

Each building contains two residential units, except for the highest building, which has one apartment (a total of 7 units). Access to the apartments is planned via external corridors, which are reached by external stairs and an elevator. The elevator provides access from the highest entrance level to the areas beneath the building, where parking spaces are planned.

Storage rooms are located under the external staircase opposite the entrances to each building, while the parking areas are situated beneath the lower buildings A and B and are accessible via two consecutive ramps from the access road to the plot.

THE STRUCTURAL design of the building is classical with brick walls 20 cm thick and with vertical and horizontal reinforced concrete ties and reinforced concrete slabs 20 cm thick, which are twisted for half a floor at the point where the level of the floor is staggered. The upper two parts of the building, buildings C and D, are on the ground and have a classic ground slab on strip foundations. The lower two parts, A and B, rest on two reinforced concrete walls, 30 cm thick, and on round reinforced concrete columns, with a diameter of 30 cm.

The walls are founded on strip foundations, and the columns on point foundations. Beneath the buildings, parking spaces are located, which are also planned on a classic ground slab (hydro-insulation and lean concrete). The supporting wall beneath building B or at the junction of buildings B and C also serves as a retaining wall for the earth on which buildings C and D stand, along with the remaining part of the sloping terrain.

THE FACADE of the building is designed as a classic contact facade, painted in light, unobtrusive tones. On the balconies, which are oriented to the southeast, shading elements are planned, specifically fixed elements made of wooden panels suitable for outdoor use. The panels are wooden, 1 cm thick, treated with a protective film that protects against physical damage and adverse weather conditions. The panels used in the balcony screens are on a steel substructure.

WINDOWS

WINDOWS are ALU RAL 8028 with triple glazing. On the southeast facade, larger glass surfaces are planned, which must have aluminum frames. Fixed wooden shading elements are planned in front of them. All windows and facade glazing have integrated external movable aluminum blinds. The entrance doors are wooden, with a solid leaf. The leaf is made of glued wood with insulating filling, and the frame is three-sided made of glued wood.

DOORS

The entrance doors are burglar-resistant and provide adequate UV protection.

INTERIOR doors are wooden with chipboard filling. The leaves are solid, the frames are three-sided, solid, dry-mounted, and have concealed hinges. The doors in the sanitary rooms are undercut. The internal glass doors are made of tempered glass, surface satin-finished with standard wooden frames.

RAILINGS

EXTERNAL glass railings are made of double tempered and laminated glass 2x8 mm, anchored in a concrete wall crown on walkable terraces according to standard details, and on balconies in a standard floor aluminum profile.

The railing of the external staircase and entrance platforms is made of stainless steel. A stainless steel wire is anchored in frames made of flat stainless steel profiles 8 mm thick, and a thin stainless steel mesh is attached to it.

For more information, please call the agent.